Elspec G4500 Series Spezifikationen PDF herunterladen (Seite 20)

July 2010

BLACKBOX PORTABLE QUICK REFERENCE GUIDE

III—2

On Site Setup | Elspec

Step 1: Connect the AC Power Supply

To connect the AC power supply:

1. Connect the female end of the Power Cable to the Main Power

Supply inlet socket (40) of the unit.

2. Connect the male plug end of the Power Cable to the electrical supply

outlet.

3. Turn the Main Power Supply On/Off switch (36) to the On position.

4. Press the Operation ON/OFF switch with indicator (16).

5. Verify the unit is running on AC Power using the status indicator lights

(as below).

Status

State

Flashing

blue

Main or auxiliary power applied, Battery

charging

Solid

blue

Main or auxiliary power applied, Battery

fully charged

Red

No main or auxiliary power available,

The unit can run on battery power for up to two

hours

Also, the device can be powered using the

Auxiliary DC Voltage Supply, please refer to the

BLACKBOX User Guide for more details.

85-260V AC ±10%, 50/60Hz

120-370V DC

35-55 VDC Watt maximum

2A/250V fuse holder

Allow only suitable fuse replacement!

Make sure the Instrument is properly grounded through

the power cord to protective earth ground.

Shop for Elspec products online at:

1.877.766.5412

www.PowerMeterStore.com

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

Keine Kommentare

Elspec G4500 Series Spezifikationen Seite 20